USB SLIDE BAR MOD Pack 1 
by LiammR from acidmods.com and Palmer from playstation.com forums

README!

This mod is for your sliding bar in USB mode. 
This pack comes with 20 different slider bars for you to choose from!

************************************************************************
WARNING, ANYTHING THAT WRITES TO FLASH HAS A CHANCE OF BRICKING A PSP.    
WHEN A PSP IS BRICKED YOU WILL NOT BE ABLE TO USE IT ANYMORE. 
ALOT HAS BEEN DONE TO TRY AND MINIMISE THE RISK, 
BUT THERE IS ALWAYS SOME LEVEL OF RISK WHICH YOU MUST 
ACCEPT IF YOU WANT TO CONTINUE. 
WE DO NOT TAKE RESPONSIBILITY FOR A BRICKED/SEMI-BRICKED PSP. 
BY USING THIS GUIDE YOU ACCEPT THESE TERMS.
******************************************************************

-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-
To install a slider bar:

1. Turn off your PSP completely by holding up the power button for several seconds
2. Boot your PSP in recovery mode by holding the R-trigger during boot-up
3. Select ADVANCED and then Toggle USB (flash0)
3. On your computer go to ms0:/VSH/RESOURCE/ and backup your sysconf_plugin.rco
4. Drag and drop the sysconf_plugin.rco of your choice into ms0:/VSH/RESOURCE/
5. You can then exit recovery mode and enjoy!
-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-



Credits: LiammR and Palmer

Many thanks to: Acidmods, QJ, pspfanboy and DCEMU

Enjoy! =]




