*** How to setup LibUSB for the PSP ***

1) Hook up your PSP to your PC via a USB cable.

2) Install the PSPLink v3.0 OE app by copying the PSPLink folder from
"PSP FW 3.XX OE" to your ms0:/PSP/GAME340 folder.

3) On your PSP go to Games and run the PSPLink v3.0 OE program. This will cause
the USB on your PSP to activate and Windows should tell you that it has
detected a new device (PSP Type B) and wants drivers for it.

3) Choose Install from a list or specific location (Advanced) then click Next

4) Select I will choose the driver to install then click Next

5) Click Have Disk then click Browse and steer to where the LibUSB/driver
folder is from the RemoteJoySDL archive and highlight psp.inf then click Open.

6) Click OK and you should have a PSP Type B listed in the window. Click Next

7) Click Finish. Congratulations! LibUSB for the PSP is installed.

You can check to see if it's installed and working correctly by going to your
Device Manager and select View -> Show Hidden Devices.

You should see a category appear named LibUSB-Win32 Devices and inside there
you should see PSP Type B. Right click on that, select Properties and in the
General tab make sure it says Manufacturer: Sony.

*******************************************************************************
*** If it does not say Sony then you most likely have to fix your IDStorage ***
*** keys!!!                                                                 ***
*******************************************************************************

You can visit Chilly Willy's thread for KeyCleaner on MaxConsole to get help
with that: http://forums.maxconsole.net/showthread.php?t=56265
