Page 1 of 3

Does no-umd work at all???

PostPosted: Sun Feb 18, 2007 4:01 pm
by backthen
i mean i cant get anything work on it, cept i got sonic rivals and dbz to run ONCE each , but after that and any other iso or cso, no luck, so does no- umd work at all for any of you? or would i just be better off getting a umd and would a demo umd work?

PostPosted: Sun Feb 18, 2007 4:04 pm
by arto14
this should be in the halp section.

did u mess w/ ur recovery mode settings?

PostPosted: Sun Feb 18, 2007 4:07 pm
by backthen
what do you mean, i did the kernal change to 1.50 and i tried it in kernal 3.10 i tried free umd region, i did everything, it just doesn't work, and its not really help im asking for(if you want to give some that would be fine) but somewhat of a poll to see who else cant use no-umd and those who can

PostPosted: Sun Feb 18, 2007 4:11 pm
by arto14
well try this;

disable the "no-umd" thingy. then make sure the kernal is 1.50.then make sure a umd is in then load ur iso.

PostPosted: Sun Feb 18, 2007 4:22 pm
by backthen
alright i guess ill have to buy a umd

PostPosted: Sun Feb 18, 2007 4:25 pm
by arto14
oh. u dont have a sample disc or a umd, but u have a memory card big enough to hold 2 iso's?

PostPosted: Sun Feb 18, 2007 4:28 pm
by backthen
yeah i have a 1gb memory stick but no sample disc or anything, no umd at all, i lost it, can i use a demo disc? or a movie umd?

PostPosted: Sun Feb 18, 2007 4:28 pm
by Puncharger
arto..it wont work like that.

PostPosted: Sun Feb 18, 2007 4:30 pm
by arto14
try this. kernal=1.50. no-umd= enabled. run the iso and see if it works.

PostPosted: Sun Feb 18, 2007 4:35 pm
by backthen
ok gimmie a minute

PostPosted: Sun Feb 18, 2007 4:39 pm
by backthen
not working, so puttign in a umd wont work either?

PostPosted: Sun Feb 18, 2007 4:41 pm
by arto14
hmmm i dont know im sorry i couldnt fix the problem. it might just be a bad iso. that happened to me and it turned up to be a bad iso.

also, try not to double post.

PostPosted: Sun Feb 18, 2007 4:42 pm
by backthen
but will putting a umd work?

PostPosted: Sun Feb 18, 2007 4:54 pm
by Puncharger
thats how the firmware is set up.. u need a disc

PostPosted: Sun Feb 18, 2007 5:06 pm
by backthen
ok so once i have a umd everything should be fine?